369娱乐APP下载

Search

3d走势图带连线2o19年

307彩的新版

sign up for our new product introductions:

39彩的彩的新版彩


Please click on the PDF to view the Soldering Profile Guidelines in a printable version.


Recommended Soldering Guidelines

 

Most contamination problems can be prevented by exercising care during the cleaning and soldering process. Care should be taken not to immerse or spray unsealed switches during flux removal. Contact E-Switch for specific soldering recommendations and specifications not found in this catalog. Generalized soldering procedures are outlined below.


HAND SOLDERING AND TEMPERATURES
Recommend soldering irons of 30 watt maximum with a tip temperature of 345°C (650°F) for 2-3 seconds and solder of 0.030 - 0.040 diameter.


SMT REFLOW (LEAD AND LEAD-FREE)

SMT Reflow soldering

Classification Reflow Profile

 

Soldering Reflow

WAVE SOLDER TIME AND TEMPERATURES

When wave soldering, we recommend using a no-clean flux soldering process, rather than a process that requires washing. The fluxing process must be controlled so as not to have flux migrate inside the switch.


WAVE SOLDER
(Includes Pb-Free, max component side preheat temp-130°C)

wave solder


Good venting is required. No-clean flux vapors can enter the switch if adequate venting is not available. The vapors will condense on the internal contacts and become an insulator when they solidify.

  • • Preheat temperature/time: Circumferential temperature of the p.c. board not to exceed 100°C (212°F) for 60 seconds.
• Soldering temperature/time: not to exceed 260°C (500°F) for 5 seconds.
2元中国福利彩票怎么看 2元中国福利彩票的买法 2元买彩票选几个数字 2元就可以打1毛的炸金花棋牌 2元彩票双色球走势图双色球 2元彩不错 2元就可以打1毛的斗地主棋牌 2元红中麻将群 2元彩票网专家杀号排列三 2元彩票网体彩排列三